Alen Williams's blog : How to Reset Canon Printer to Its Factory Settings

This post is to give you clear guidance on how to reset the Canon printer to its factory/default settings. Moreover, try to track the below-mentioned guidelines to finish the process.

Steps to Reset the Canon Printer

Proceed using the steps mentioned below carefully to finish the process on “How to Reset Canon printer to factory/default settings”:

1- Initially, select the setup option on your Canon printer.

2- Connect through the arrow buttons on your printer to pick the device settings. Try to confirm with the OK button.

3- Concerning the arrow buttons, tap to reset setting option >OK.

4- Finalize with Reset All>OK.

5- Give yes.

6-Now, confirm with the OK button again to finish the process.

Note: You need to set up your printer again as per your preferences after the resetting procedure.

How to Reset Canon Printer to Factory Settings Using Power Reset?

With reference, many printers don’t support a reset button (Printer without a reset button), you can prefer the following method on how to reset their Canon printer:

1- To begin with, turn OFF the Canon printer.
2- Next, remove all the connected power cables as well. Make sure that the printer has been completely disconnected from its respective power source.
3- Wait atleast for 30 seconds.
4- Further, reconnect the discarded cable to the power source again using the Canon Manual support to the printer.
5- Turn ON the desired printer.

Hope, you might have received a solution for your question- ‘How to Reset Canon Printer’. yet, you face the same issue, follow the below directives.

How to Reset Canon Printer Using Stop and Power Buttons?

For your concern, this method doesn’t require any software to establish this process of resetting the canon printer to default/factory settings. Steps to do are given below:

1- Make sure the Canon printer is turned ON and configured to the computer.
2- Then, switch OFF the printer by pressing the “power” button.
3- Further, select the stop button for two seconds.
4- After pressing the stop button, gently press the power button at least for two seconds. Now, release your hands from the stop button.
5- With reference to the hold-on power button, press the stop button five times.
6- Finally, it’s time to press the power button.

You can see your printer will be under a reset state and the screen may go blank. Let them be idle for a few seconds to get back to their normal state with their default settings. If it doesn’t make any noises, press the “On” button and it will restart your printer.
Still, your printer seems troubling you, it’s the last attempt with hard reset & Factory procedure:

How to Reset Canon Printer Using the Hard Reset?

1- Initially, hold the stop button and relax until you notice warning alerts from the printer.
2- Then, try to use the start button at least 19 times.
3- Further, you can see your printer has been reset to the default settings.
4- Uninstall all the drivers related to the printer from your computers.
5- Finally, install all the latest drivers that match the active computer.
How to Reset the Canon PIXMA Printer to its Factory Settings?

1- To start with, turn ON the Canon printer.
2- In accordance with the navigation arrows, use the menu and scroll down. Try to locate the device settings option to pick it.
3- Give Ok button > resetting option.
4- Finalize with OK and do the reset process.
5- Switch OFF the desired Canon PIXMA printer and press the stop & power buttons together.
6- Later, release the stop button and hold down the power button as pressed.
7- Choose the stop button twice.
8- Wait for the screen alert that shows “O” on the screen which can approximately take 30 seconds.
9- Further, select the “stop” button four times.
10-Then, press the power button again tow times.
11- Finally, press the located power button again to turn OFF your printer.
Complete the following tasks before you may set up IJ.Start.Cannon Photocopier
1- Before you start setting up your printer, you should always have its model number handy.
2- Check to verify if you have adequate storage space on your device to install the driver.
3- Ascertain that the printer is properly connected to the power supply.
4- Determine whether your device is connected to the internet.
Ij.start.canon User Manual for Canon Printer Setup (Wireless) on Windows
1- To get started, go to ij start canon setup’ and download and install the printer driver.
2- Activate the Canon printer and verify that the power cord is properly attached.
3- Then, browse to the “Wireless Setup” screen after opening the downloaded driver setup file.
4- Return to the Canon printer’s interface after selecting the wireless option and press the WiFi configuration button.
5- Once you’ve chosen your device settings, click OK.
6- Then go to Device Settings>LAN Settings and press OK.
7- LAN Settings>Wireless Lan Setup, then click “OK.” Your printer will now try to find an access point.
8- Check that your WiFi router is turned on. The printer’s WiFi indicator light will now blink.
9- After that, the screen will show a network list. Choose your WiFi network from the list, then click the ‘OK’ button.
10- Now, it will ask for your WPA/WEP key (WiFi password).Enter your proper password here, then press the ‘OK’ button.
11- Your printer will connect to the WiFi network in a few moments.
12- As a result, by following the instructions above, you should be able to simply complete Canon ij wireless setup for your Windows PC.

How to Install a Canon Printer on a Mac Using ij Start Canon
Before proceeding, download and install the driver from https //ij.start.canon
1- Follow the instructions in the first section of this article to connect your Canon printer to the same WiFi network as your smartphone.
2- From the ‘Apple’ menu, select ‘System Preferences.’
3- In the System settings box, click the printer-shaped icon labelled “Printers and scanners.”
4- After clicking on the “+” sign near the bottom left corner of the screen, a pop-up window will open.
5- If your printer is already linked to the network, its name will appear in the left-hand window. To initiate the installation procedure, click on it.
6- When the process is complete, your printer will be marked with a Green check mark, indicating that it is ready for use.

For Windows, Ij.Start Canon IJ Setup Instructions (Wireless)
Follow these instructions to connect your printer to a wireless network.
1- To begin, navigate to http://ij.start.canon mac setup’ and enter the appropriate printer model number to get the Canon printer driver.
2- Double-click the downloaded driver file and then follow the on-screen directions.
When a security warning displays, click the ‘Rub’ button to enable the software to execute on your computer.

1- Select 'Wireless LAN Connection' by clicking the 'Next' button.
2- Hold the WiFi button on your Canon printer down until the alert lamp flashes twice, then let go.
3- Navigate to the ‘Menu’ and select ‘Device Settings’ on the Canon printer screen tab.
4- Then, on the printer, go to Menu>Device Settings>LAN Settings>Wireless LAN Setup, and then press the ‘OK’ button.
5- Your printer will now attempt to connect to a router access point.
6- Press the ‘OK’ button on the printer’s interface to select your wireless network name.Then, on the next screen, input the WPA Key (WiFi password).
7- Your printer must be connected to your wireless network in order to use IJ Startup Canon Setup.

After that, we'll look at how to see if your printer has been added to Windows for both wireless and wired connections.
1- From the Windows search bar, open the ‘Run’ dialogue box and type ‘Control Panel’ before clicking the ‘OK’ button.
2- As soon as you go to the control panel, click on “Devices & Printers.”
3- A ‘Green Tick Mark’ will appear if your printer has previously been added.
4- If your printer isn’t shown, click the ‘Add Printer’ option to manually add it.
5- A list of the printers that are currently available will be shown. After selecting your Canon printer, click the ‘OK’ button. After a few seconds, your Canon printer will display in the ‘Device and Printer’ section with a ‘Green Check Mark.’
6- Finally, your Canon IJ printer is linked wirelessly to your Windows machine.

Canon IJ Wired (USB) may be installed on Windows with the help of Ij. Start Canon
To connect your Canon IJ printer to your Windows system through a wired USB connection, follow the steps below.
1- Make that the PC and the Canon printer are both turned on.
2- Follow the instructions at http//ij.start.canon mac setup to install the Canon printer driver.
3- Connect one end of the USB cable to the printer and the other to the Windows PC.
4- Control Panel>Device settings>Add printer is where you can add a new printer.
5- Your printer is now operational.

Canon com ijsetup for Mac Printer Installation (Wireless)
To get started with the http//ij.start.Canon mac setup, follow the steps below.
1- Enter canon http//ij.start.canon mac setup into your browser after typing it.
2- Identify your Canon ij Printer model and operating system (MAC)
3- Double-click the file after saving it to your computer to open it.
4- Follow the steps in the first section of this article to connect your Canon IJ printer to a WiFi network.
5- Choose “System Preferences” from the “Apple” menu.”
6- Then choose “printers and scanners.”
7- Click the ‘+’ sign to add a printer. A pop-up window will appear on the screen containing the name of your printer.
8- Choose a printer and click the ‘Add’ button to manually add it.
In a matter of seconds, your printer will be connected to your Mac computer through wireless connection and ready to use.