Michael Keller's blog : How to Set up Netgear EX6150 WiFi Range Extender

With Netgear EX6150 setup, you'll establish a mesh network with the assistance of your existing WiFi network and extend it to each corner of your house. With the help of its dual WiFi bands, you'll get one super high-speed connection for your HD gaming and streaming needs.

This Netgear extender comes with a Netgear EX6150 manual for simple setup and installation.

Setup Netgear EX6150 Extender Manually

To perform Netgear extender EX6150 setup manually, follow the steps given below:

Turn on your Netgear AC1200 EX6150 extender.
Place the extender near your WiFi router.
After that, plug the extender into a wall outlet.
Wait for the LED to light up.
If the LED doesn't light up, restart your extender.
Connect a PC or mobile device to the extender employing a WiFi or LAN connection.
Launch an internet browser from a PC or mobile device and enter mywifiext.net.
The Netgear installation assistant displays.
Follow the prompts to connect your extender to the present WiFi network.
Move your extender to a replacement location you wish.
If you get no or a poor connection, move the extender nearer to your router till the LED lights white.
After you discover the most effective location for your extender, connect your smart devices to the extended WiFi network.

In this manner, you can manually set up and install your Netgear AC1200 EX6150 WiFi range extender with ease. If you don't like this method, we recommended you to opt for the WPS method. We have described the WPS setup method in detail below.

Use WPS Button For Netgear EX6150 AC1200 Setup

In order to perform the Netgear AC1200 EX6150 setup via WPS:

Power on the Netgear AC1200 mesh extender (EX6150).
Place the extender and WiFi router within the same area.
Once done, plug your extender into a wall plug.
Wait for the LED on EX6150 to light up.
Press the WPS button on the extender.
Now, press the WPS button on your WiFi router.
If the Netgear EX6150 Link LED lights white, the connection between your router and extender is nice.
If your router supports the 5 GHz band, your extender makes an attempt to connect to the router’s 5 GHz band once you press the WPS button for the terribly first time.

Note: On the off chance that your extender didn't hook up with the router’s 5 GHz band the primary time, it should end in tons of problems throughout the Netgear extender setup.

Move your extender to a replacement location you wish.
Take your WiFi-enabled PC or mobile device to the placement with poor WiFi router coverage.
Connect your WiFi-enabled PC or mobile device to the extended network. Your extender uses the similar WiFi network settings as your router for its 2.4 GHz and 5 GHz extended networks.

That's how you'll complete your Netgear EX6150 Setup through the WPS button. If you stumble upon any form of a technical issue throughout the setup method, make sure to contact highly-experienced technicians for quick help.

In: