joseph rock's blog : How to Inflate and Deflate Your Inflatable Paddle Board

Inflating Your Paddle Board

Inflating your inflatable paddle board is a straightforward process that usually takes less than 10 minutes. It's often best to inflate your paddle board once you arrive at your destination, as these boards are easier to transport in a carry backpack. Here are the steps to follow:

Prepare the Board: Remove your board and accessories from the bag. Unroll the board completely on a smooth surface free of rocks and debris. Grass is ideal. Unscrew the valve cap. Before you start inflating, ensure the valve pin is in the upright position to close the valve seal and prevent air leaks when removing the pump hose.
Attach the Pump: Insert the pump hose into the valve and twist it counter-clockwise. Connect the other end of the hose to the "Out" port on the pump. If you're using an electric pump, set it to stop at 12 PSI. Note that the PSI gauge will not register until you reach at least 7 PSI.
Inflate to 9-10 PSI: Once you reach 9-10 PSI, remove the red cap on the hand pump to switch from dual action to single action, making it easier to inflate the remaining PSI.
Inflate to 12-15 PSI: Continue pumping until your board reaches 12-15 PSI. Ensure you reach at least 12 PSI for optimal performance.
Detach the Pump: Carefully twist off the pump’s hose and replace the valve cap on your board.
Insert the Fin: Insert the snap-in rear fin and secure it with the small thumb lever. Your paddle board is now ready for use!

Deflating Your Paddle Board

Deflating your inflatable paddle board is simple and quick. Follow these steps:

Rinse and Dry the Board: Before deflation, rinse your board with fresh water and dry it completely. Remove the valve cap and push down on the valve pin, twisting and locking it in the open position. A large hiss of air will rush out, which is normal.
Roll the Board: Once most of the air is out, start rolling the board from the nose to the tail, keeping the fin box on the outside. Rolling this way helps remove all the air. Use the included strap to keep your board tight.
Pack the Board: Place your rolled-up board, paddle, fin, pump, and leash into your backpack. You're all set to head home!

By following these simple steps, you can efficiently manage your inflatable paddle board for a great time on the water.

FAQs

Q: How long does it take to inflate an inflatable paddle board? A: It usually takes less than 10 minutes to fully inflate an inflatable paddle board.

Q: Should I inflate my paddle board before or after arriving at my destination? A: It's best to inflate your paddle board after arriving at your destination for easier transport.

Q: How do I ensure the valve seal is closed before inflating? A: Make sure the valve pin is in the upright position before starting to inflate the board.

Q: What PSI should my inflatable paddle board be inflated to? A: Inflate your board to 12-15 PSI for maximum performance.

Q: Can I use an electric pump to inflate my paddle board? A: Yes, you can use an electric pump. Set it to stop at 12 PSI.

Q: How do I deflate my inflatable paddle board? A: Remove the valve cap, push down on the valve pin, and twist to lock it in the open position. Then, roll the board from nose to tail to remove all the air.

In: